| Restocking Fee | 15% |
| Return Shipping Will Be Paid By | Seller |
| Returns Accepted | Returns Accepted |
| Item Must Be Returned Within | 30 Days |
| Refund Will Be Given As | Money Back |
| Brand | Pro-X |
| Engine Type | 2-Stroke |
| Type | Piston Kit |
| Machine Type | Off-road Motorcycle |
| Manufacturer Part Number | 2698 |
| Piston Diameter | +.080" |
| Cylinder Bore Diameter | 56.00mm |
| Country/Region Of Manufacture | Japan |
READ THIS BEFORE PURCHASING :BUYER TIPS ON PURCHASING THE CORRECT PISTON SIZE.To determine which piston size you require there is a very important first step. Always measure your cylinder bore size first. This is only size that matters! Two-Stroke pistons are listed by size to FIT the cylinder bore size. Measuring pistons to determine what to purchase will most likely cause you to purchase an incorrect piston to fit the cylinder bore. Two-Stroke pistons are manufactured with a cam shape. They are never straight and round. Measure a 2-stroke piston at the bottom of the piston skirt, ninety degrees from the wrist pin hole. This measurement only is used determine piston to bore clearance. Do not try to match a size from a used piston. This will always produce a faulty measurement. Used pistons wear out and change shape. Buyer Tip: Before purchasing, remove your cylinder to be inspected and measure for bore size. If boring is required for your cylinder, purchase a piston at least two sizes larger than the measured size to allow clean-up and honing to the new piston size. This is a new PRO-X Piston Kit. Oversize +.080" (2.00mm) fits 56.00mm bore. New piston kit, old stock. Fits: SUZUKI RM-125 1980-84, 2-Stroke. There are more piston sizes to choose on my store site. Here is a list of piston sizes available to purchase:1st oversize bore +.010" 54.25mm 5th oversize bore +.050" 55.25mm 7th oversize bore +.070" 55.75mm 8th oversize bore +.080" 56.00mm *you are buying this one today9th oversize bore +.090" 56.25mm A qualified machine shop is required to measure your cylinder, then bore the cylinder to fit the piston.Check your bore size before purchasing. Helpful hint: When in doubt about the size needed, order one size larger, you can always bore the cylinder to fit. Year and Model are important, check yours before purchasing. This 1980-84 year model RM-125 is a domed top piston. The kit is supplied with piston, double ring and clips and pin.Keep your vintage RM-125 running with this piston kit. You will receive 1 each piston kit when you order. Note : Picture is exact model, you will receive this kit when ordering. Track Page Views WithAuctiva's Counter
